Product ID:QUICK DRY ENAMELS, 54-B (041390M)
MSDS Date:06/01/1990
FSC:8010
NIIN:00N026619
MSDS Number: CFNQV

PPG INDUSTRIES INC

260 KAPPA DR
PITTSBURGH, PA 15325
US

Emergency Phone: 204-843-1200

Info Phone: 800-441-9495

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

NOT EXPECTED, THERE IS NO SIGNIFICANT HAZ FOR MAN.

RTECS: 9999999ZZ

DIZZ, & LOSS OF COORDINATION ARE INDICATIONS THAT

RTECS: 9999999ZZ

SENSATION & VISUAL DISTURB MAY INDICATE EXCESS EYE

RTECS: 9999999ZZ

SWELLING ARE CONDITIONS ASSOCIATED WITH EXCESSIVE

RTECS: 9999999ZZ

INGEST EXCESSIVE EXPOS TO CORROSIVE

RTECS: 9999999ZZ

TYPE OF AIRBORNE CONTAMINANTS AGAINST WHICH THE

RTECS: 9999999ZZ

LEL BELOW STATED LIMIT, & TO REMOVE DECOMP PRODS

RTECS: 9999999ZZ

ALUMINUM SILICATE

CAS: 1335-30-4

Fraction By Weight: 30-35%

OSHA PEL N/K

ACGIH TLV: N/K

PIGMENTS

Fraction By Weight: 15-20%

OSHA PEL N/K

ACGIH TLV: N/K

SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (MEDIUM

CAS: 64742-88-7

Fraction By Weight: 2-5%

OSHA PEL N/K

ACGIH TLV: N/K

MINERAL SPIRITS; (HYDROTREATED HEAVY NAPHTHA)

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: 25-30%

OSHA PEL N/K

ACGIH TLV: N/K

SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (MEDIUM

CAS: 64742-88-7

Fraction By Weight: 40-45%

OSHA PEL N/K

ACGIH TLV: N/K

XYLENE (SARA 313) (CERCLA)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 2-5%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM/150 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 70-75%

OSHA PEL N/K

ACGIH TLV: N/K

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

POTENTIAL FOR INHAL OF TITANIUM DIOXIDE

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: HARMFUL/FATAL IF
SWALLOWED. EYES: SEV IRRIT. SKIN: MOD IRRIT. INHAL: VAP & SPRAY
MIST MAY BE HARMFUL. VAP IRRITATES EYES, NOSE & THROAT. RPTD EXPOS
TO HIGH VAP CONCS MAY CAUSE IRRIT OF RESP SYS & PERM BRAIN & NERV
SYS DMG. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING &
INHALING (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: CONTENTS CAN BE HARMFUL/FATAL.
CHRONIC: AVOID LONG TERM & RPTD CONT. PROD CONTAINS TITANIUM
DIOXIDE. ANIMALS INHALING MASSIVE QTYS OF TITANIUM DIOXIDE DUST IN
LONG-TERM STUDY DEVELOPED LUNG TUMORS. STUDIES W/HUMANS INVOLVED
IN MANUFACTURE OF PIGMENT INDICATE NO INCRD RISK OF CANCER FROM
EXPOS. (ING 9)
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

First Aid:INGEST: DO NOT INDUCE VOMIT. EYES: FLUSH IMMED W/PLENTY OF
WATER FOR AT LEAST 15 MIN. SKIN: REMOVE PROMPTLY BY WIPING FOLLOWED
BY WATERLESS HAND CLEANER & SOAP & WATER. INHAL: REMOVE TO FRESH
AIR. APP LY ARTF RESP & OTHER SUPPORTIVE MEASURES AS REQUIRED. IF
ANY OF THE FOLLOWING OCCUR DURING/FOLLOWING USE OF THIS PROD, CONT
POIS CTL CTR EMER ROOM/MD IMMED. HAVE MSDS INFO AVAIL. (ING 14)

Flash Point Method:PMCC
Flash Point:110F,43C
Lower Limits:0.9%
Extinguishing Media:USE NFPA CLASS B EXTING (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING NFPA
(SUP DAT)
Fire Fighting Procedures:WEAR NIOSH APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFFECTIVE. WATER SPRAY MAY BE USED TO COOL
CLSD CONTRS TO PVNT PRESS BUILD-UP & (SUP DAT)
Unusual Fire/Explosion Hazard:KEEP CONTRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPKS, & OPEN FLAMES. CLSD CONTRS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DO NOT APPLY ON (SUP DAT)

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH APPRVD RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN AREA.
REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE/OTHER ABSORB MAT L & PLACE INTO CONTRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE > 120F. STORE LGE QTYS IN
BDGS DESIGNED & PROTECTED FOR STOR OF NFPA CLASS II COMBUST LIQS.
CONTRS SHOULD BE GROUNDED WHEN POURING.
Other Precautions:IF THIS MATL IS PART OF A MULTIPLE COMPONENT COATING
SYS, READ MSDS FOR OTHER COMPONENT/COMPONENTS BEFORE BLENDING AS
THE RESULTING MIXURE MAY HAVE HAZARDS OF ALL OF ITS PARTS. AVOID
FREE FALL OF LIQ IN EXCESS OF A FEW INCHES.

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
VENT CTLS, VAP EXHST/FRESH AIR ENTRY. NIOSH APPRVD (TC-23C) PAINT
SPRAY/AIR SUPPLIED (TC-19C) RESPS MAY ALSO REDUCE EXPOS. READ RESP
MFR'S INSTRUCTIONS & L ITERATURE CAREFULLY TO DETERMINE(ING 15)
Ventilation:PROVIDE ADEQ DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS BELOW LOWEST SUGGESTED EXPOS LIMITS, (ING 16)
Protective Gloves:NITRILE RUBBER, NEOPRENE RUBBER/PVA.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYEWASH & DELUGE
SHOWER . WEAR PROTECTIVE CLOTHING, INCLUDING IMPERMEABLE APRON.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXTING MEDIA: CLASS II COMBUST LIQ FIRES. FIRE FIGHT PROC: POSS
AUTOIGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT. IF WATER IS USED, FOG
NOZZ ARE PREF. EXPLO HAZ: HOT SURF. TOX GASES MAY FORM WHEN PROD IS
CONTACTED BY FLAME/HOT SURF. HAZ DECOMPPROD: FUMES INCL CARBON
MONOXIDE.

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:<3
Vapor Density:HVR/AIR
Spec Gravity:1.0-1.3
Evaporation Rate & Reference:<19 (BUTYL ACETATE=1)
Solubility in Water:<1%
Appearance and Odor:VISCOUS LIQ W/ODOR CHARACTERISTIC OF SOLVENTS
LISTED IN INGREDIENTS SECTION
Percent Volatiles by Volume:<85

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME-CUTTING ON SURF COATED W/THIS PROD
MAY PRODUCE (SUP DAT)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS.
EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN
APPROVED WASTE MANAGEMEN T FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.